ASVAB Auto and Shop Information Practice Questions with Answers

6 min read · Updated

Auto Information tests your knowledge of automobile technology, and Shop Information tests tools, shop terminology and practices. On the computer they are two separate sections; on paper they are combined into one. Either way they are reported as a single Auto and Shop score. They do not count toward the AFQT but feed the mechanical and maintenance composites.

CAT-ASVABPaper ASVAB
Auto Information10 questions, 7 minutesCombined: 25 questions,
Shop Information10 questions, 6 minutes11 minutes
Counts toward the AFQTNoNo

What Auto and Shop covers

  • Engine basics: the four strokes, fuel, ignition and lubrication
  • Cooling, charging, starting, brakes, steering and the drivetrain
  • Exhaust and emissions systems
  • Hand tools, power tools and what each is for
  • Fasteners, measuring and layout tools, and basic shop practice

Auto and Shop practice questions

Which component stores the electrical energy used to crank the engine?

  • AAlternator
  • BBattery
  • CDistributor
  • DRadiator

Explanation

The battery stores the energy that powers the starter motor. The alternator recharges the battery once the engine is running; it does not crank the engine itself.

What is the main job of a car's radiator?

  • AFiltering the engine oil
  • BCharging the battery
  • CMixing air and fuel
  • DReleasing heat from the engine coolant into the air

Explanation

Hot coolant flows from the engine through the radiator, where air passing over the fins carries the heat away. The cooled liquid then returns to the engine.

Which tool is used to tighten a bolt to a specified force?

  • ATorque wrench
  • BPipe wrench
  • CLocking pliers
  • DAllen key

Explanation

A torque wrench measures how hard a fastener is being turned, so bolts such as wheel lug nuts can be tightened to the manufacturer's specification.

A coping saw is mainly used for

  • Acutting metal pipe.
  • Bripping long boards along the grain.
  • Ccutting curves and intricate shapes in wood.
  • Dtrimming tree limbs.

Explanation

A coping saw has a thin blade in a deep frame, which lets it follow tight curves. Metal pipe calls for a hacksaw or pipe cutter, and long rip cuts for a rip saw or table saw.

What does a catalytic converter do?

  • AIncreases engine power
  • BReduces harmful gases in the exhaust
  • CCools the transmission fluid
  • DQuiets the exhaust noise

Explanation

The catalytic converter uses catalysts to turn harmful exhaust gases into less harmful ones. Quieting the exhaust is the muffler's job.

A plumb bob is used to establish

  • Aa level horizontal line.
  • Ba right angle.
  • Cthe depth of a hole.
  • Da true vertical line.

Explanation

A plumb bob is a weight on a string; gravity pulls the string into a true vertical line. A level checks horizontal, and a square checks right angles.

Know what each tool is for

Many Shop questions show a tool or name one and ask what it does. Going through a list of common hand tools, saws, wrenches and measuring tools, with one line on each, covers a large share of the section.

Quick answers

Are Auto and Shop separate sections on the ASVAB?

On the computer CAT-ASVAB, yes: Auto Information and Shop Information are separate. On the paper ASVAB they are one combined section. Both are reported as a single Auto and Shop score.

Does Auto and Shop count toward the AFQT?

No. It feeds the mechanical and maintenance job composites, not your enlistment score.

Ready to test yourself properly?

Reading about the ASVAB only takes you so far. Sit a full-length timed simulation and find out what you would actually score.

See packages